ABS-300 ABSOLUTE HUMIDITY SENSOR range 0 to 130 g/m3 with an
output of 0-13 mV. IDEAL FOR HARSH ENVIRONMENT. Thermal conductivity, operation from 25°C to 200°C, Condensation
proof. Immune to chemical vapors. Aluminum sensor housing and over braided
shielded cable in twenty eight inch or fifteen foot lengths.
|
 |
|
| UPS-500 RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing
environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation
20 - 90 % @70 °F +/- 2%, temp. -4 to +140°F. Reverse logarithmic output.
Available as signal conditioner and sensor SC-500.
|
 |
|
UPS-600 "WATERPROOF" RESISTIVE TYPE HUMIDITY SENSOR. For condensing
environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation
20 - 90 % @70°F +/- 2%, temp. 32 to +122°F. Reverse logarithmic
output. Available as signal conditioner and sensor the SC-600.
|
 |
|
HS-Series NARROW RANGE RESISTIVE TYPE HUMIDITY SENSOR.
1% accuracy. Excitation voltage 1 - 6 @ 33 Hz to 33 KHz. Temp 0 to 160°F.
Eight sensors over a range of .7 to 99% RH. Use with the HCL/SC signal
conditioner or controller card.
|
 |
|
SC-500 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing environments. Excitation voltage
150 mV RMS @ 3.8 KHz. Range of operation 20 - 90 % @70 °F +/- 2%, temperature
-4 to +140°F. Requires a 5 volt DC regulated power supply.
|
 |
|
SC-600 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. For condensing environments. Excitation voltage
150 mV @ 44 Hz. Range of operation 20 - 90 % @70°F +/- 2%, temp. –32
to +122°F. Requires a 5 volt Dc regulated power supply.
|
 |
|
SC-600E RESISTIVE TYPE HUMIDITY SENSOR WITH SEALED ELECTRONICS. Replaceable sensor. Linear output, 5 VDC regulated supply
voltage required . Range of operation 20 - 90 % @70°F +/- 2%, temp.
–-4 to +140°F. 3 foot shielded sensor cable. Used in ethylene
oxide and other gas environments.
|
 |
